Overview DIO 565

Ultrasonic defectoscope DIO 565 is low cost ultrasonic instrument that offers accurate defect detection in many applications.

Comparison of DEFECTOBOOK DIO 1000 and DIO 565.

DIO 565 General Features:

• Each flaw detector may be used with a single or dual ultrasonic probe for flaw detection and thickness measurements
• The family has several members, the features of which differ according to properties of the material under test (see the overview above)
• The received signals are digitally processed
• Each instrument is equipped with a memory card and may be connected to a PC
• Each flaw detector has three gates with alarm facilities
• AVG and DAC curves for flaw size evaluation
• Easy calibration for FBH, SDH and BWE
• Echo height processing as averaging, peak value freezing
• Freeze peak value
• Adjustable time base with zoom, interface triggering
• Analogue filtering for signal/noise ratio for enhancement
• 2-D display / B-scan
• Real time clock
• Voice recording
• Recording of all set-up parameters
• Low power mode
• Mains or battery supply
• Attenuation measurement
• 3 gates (gate 3 with adjustable gain)
• Averaging
• FIR filter
• Burst pulser

TECHNICAL SPECIFICATION:

Plug-in memory cards (PCMCIA 1MB) for up to 780 A-scans
Records: 100 AVG diagrams, 100 DAC diagrams
                  100 device settings with 6 min. voice recording
                  300 device settings without voice recording
Gain:  20 - 100 dB in 0.1 dB steps
Frequency range:    0.5 - 20 MHz, PRF    20 - 5000 Hz , Burst    1.0 - 8 MHz
Filters: Analogue filters – Wideband    2.5, 5.0, 4.0 MHz
              Digital filters (FIR)    1, 2.5, 5.0, 4.0 MHz
Propagation velocity:  1 000 – 10 000 m/sec
Max. range in steel:  10.5 m
Communication interface:  RS 232 (RS 485), Ethernet, USB cable
Digitization rate: 36 - 256 MHz
Display: 128 x 256 pixels
Operating Temperature: 0 °C to +50 °C
Battery operating time: 7 hours (NiMh), 12 hours (LiIon), replaceable rechargeable battery
                                           External rechargeable battery (optional), Battery charger
LEMO cables
Instrument cover
Rugged carrying case
Dimensions:   Dio 565 – 235×145×50 mm
                          Dio 1000 - 224×188×37 mm

Weight:    Dio 565 – 0.8 kg with batteries
                  Dio 1000 – 0.74 kg without batteries

DIO 565 is the common low cost version, which cannot be upgraded.

Versions: